– Stimulation Levels 1-5
– 2-Hour Rapid Charge Batteries
– Non-Stimulating Pager Vibration
– Ultra-Compact Receiver/Collar
– Fully Waterproof Receiver/Collar
– EZ Coding for Extra Receivers
– 40-Acre Maximum Area Coverage
– Boundary Safety Disconnect Feature
– Wire Continuity Indicator
– Within Boundary Sleep Mode
– For Dogs as Small as 15 lbs.
– 2-Year Limited Lifetime Warranty
Fence Wire – The fence wire must make a continuous loop around your property for your system to operate. The signal is delivered from the terminal of the transmitter, through the fence wire, back to the other terminal on the transmitter. When this is accomplished, the wire continuity light will emit a constant red indicator.
“The wire should be buried approximately 4-6 inches into the ground, or deep enough to protect it from being damaged by any machinery or dug up by your dog. (The wire does not have to be buried in order to work.)”
CAUTION – Before you install your fence wire, contact the utility company to mark the utility lines on your property before you begin digging. Be sure to test your wire layout above ground before permanent installation begins.Carefully choose the areas in which you want to contain your dog. A diagram may be helpful in predicting unforeseen obstacles. (Please refer to the diagrams below.)
When creating a Front Boundary Only, Fence Front Yard Only, or Front Boundary with Existing Fence type of e-fence system, THE TWO PARALLEL E-FENCE WIRES MUST BE 6-10 FEET APART to avoid any signal interference.
*Please note, the diagrams are not drawn to scale. Single loop systems must keep 6-10 feet of distance between the wires as well.
Front Boundary Only
Fence Front Yard Only
Front or Back Access
Basic Loop with Garden
Front Boundary with Existing Fence
Double Loop with Passage
Keep wires ~ 6ft. apart to avoid signal interference.
The Dogtra eF-3000 Gold system includes 500 feet of boundary wire and 50 training flags. Additional flags and wiring can be purchased through the Dogtra Company. See below for flag + wire buying guide. Additional Parts The figures above are indicated for a rectangular layout. Actual flag/wire requirements may vary depending on the layout you’ve chosen
All Dogtra products must be registered and/or a proof of purchase is required to initiate repair work under warranty. Registration must be completed within 30 days of purchase. If you do not have access to a computer, you can call our toll free number at 1-888-811-9111, and one of our customer service representatives will register the product for you. If you were unable to register your product within 30 days of purchase, we will accept all products for repair with a proof of purchase. If your product is not registered and a proof of purchase is not available, Dogtra will estimate the age of the unit by the serial number. Serial number estimates can differ from the actual purchase date.Warranty Registration